Related Manuals for Gasmate Horizon GM172-008
Summary of Contents for Gasmate Horizon GM172-008
- Page 1 Horizon Gas Grill Model No. GM172-008 Model No. GM172-012 FOR OUTDOOR USE ONLY - OPERATES ON LPG/ULPG 3899-05/14...
-
Page 2: General Information
GENERAL INFORMATION Gas Installation Codes • Barbecues must be used in accordance with If you are unable to correct the leak by tightening the New Zealand Standard 5601 “Gas Installations”. connections, turn off the gas and contact the supplier immediately. •... -
Page 3: Protect Children
• Never alter or modify the regulator or gas supply assembly. • This barbecue must not be used indoors. Nominal Hourly Gas Consumption Model No. GM172-008 Total Gas Number of Injector Size Injector Size Gas Type... -
Page 4: General Assembly
GENERAL ASSEMBLY LIGHTING PROCEDURE Connecting & Disconnecting to Gas Source Before lighting your barbecue for the first time, read the instructions fully to ensure the barbecue is assembled correctly and is ready for use. IMPORTANT: Before connecting and disconnecting barbecue to gas source, make sure burner controls Remove all point-of-sale material from the barbecue. -
Page 5: Operating Procedure
Burner Operation & Ignition System Check Problem Possible Reason Solution Valve on cylinder is closed Open valve on cylinder Burner will not ignite Control knob is closed Turn knob to high when lighting Electronic igniter is faulty Use a long barbecue match Burner has gone out Check that the gas bottle is not empty and re-ignite the burner... -
Page 6: Cooking Times
Poultry When using poultry, truss the birds tightly so that wings and drumsticks are close to the body of the bird. The cavity of the bird maybe stuffed prior to this if you wish. Pull the neck skin down and using a small skewer fix to the back of the bird. - Page 7 GM172-008 EXPLODED DIAGRAM - 4 BURNER MODEL...
- Page 8 GM172-008 PARTS LIST 1. Body Assembly 2. Warming Rack 3. Flame Tamer 4. Cast Iron Cooking 5. Cast Iron Plate x1 pc x1 pc x2 pcs Grill x1 pc x1 pc 6. Side Shelf 7. Side Burner 8. Side Burner Trivet 9.
- Page 9 GM172-012 EXPLODED DIAGRAM - 6 BURNER MODEL...
- Page 10 GM172-012 PARTS LIST 1. Body Assembly 2. Warming Rack 3. Flame Tamer 4. Cast Iron Cooking 5. Cast Iron Plate x1 pc x1 pc x4 pcs Grill x1 pc x1 pc 6. Side Shelf 7. Side Burner 8. Side Burner Trivet 9.
-
Page 11: Assembly Instructions
ASSEMBLY INSTRUCTIONS NOTE: The 4 burner model is shown here. Follow these instructions for the 6 burner model also. Before assembling the barbecue, read these Instructions carefully. Assemble the barbecue on a flat, clean surface. The barbecue is heavy. NOTE: Do not fully tighten all the nuts during the initial stages of assembly. Caution: Sheet metal can cause injury. - Page 12 ASSEMBLY INSTRUCTIONS Step 3 Attach the cabinet back panel (18) between the left and right cabinet side panels using 4 x M6x12 screws. Secure the cabinet back panel to the base panel with 1 x M6x12 screw in the centre. Ensure that the vents in the cabinet back panel are at the top.
- Page 13 ASSEMBLY INSTRUCTIONS Step 5 Attach 1 x cabinet side top panel (14) to each cabinet side panel using 4 x M5x10 screws. Then secure the cabinet top panel (13) to the cabinet side top panels using 6 x M6x12 screws. Now secure the cabinet top panel (13) to the cabinet back panel using 3 x M6x12 screws.
- Page 14 ASSEMBLY INSTRUCTIONS Step 7 With the help of a friend place the body assembly (1) onto the top of the cabinet assembly. Secure with 4 x M6x12 screws and 4 x C washer (28) to the top of the left and right hand cabinet side panels. Attach the hose and regulator assembly ensuring a tight seal is created.
- Page 15 ASSEMBLY INSTRUCTIONS Step 9.1 Attach the side burner side shelf assembly (7) by loosening the top front and back screws on the left hand side of the body assembly by 5 - 10mm. Then slot the screw heads through the large holes in the side shelf assembly. Push down on the side shelf so that the screw head slots into the top narrow part of the hole.
- Page 16 ASSEMBLY INSTRUCTIONS Step 9.3 Insert the side burner (9) into the side burner side shelf bowl by positioning the burner tube through hole in shelf. Secure side burner to shelf with 2 x M4 nickel plated screws. Make sure that the side burner engages the side burner valve at the front of the side shelf. Insert side burner trivet (8) over side burner ensuring trivet lines up with the holes in the side shelf bowl.
- Page 17 ASSEMBLY INSTRUCTIONS Step 11 Insert flame tamers (3) into the body assembly over the 2 burners starting from the left burner. Note: Model GM172-012 has 4 flame tamers supplied. Then add cast iron grill (4) over burners with flame tamers and then cast iron hot plate (5) on the right. Insert warming rack into the holes at either side of the back of the fire box and rest front bars in rotisserie hoops.
- Page 18 ASSEMBLY INSTRUCTIONS Step 12.1 GM172-008 (4 burner model): Only the rotisserie bracket is supplied with this bbq. You must purchase your rotisserie separately. This rotisserie bracket must be used instead of the bracket supplied with your purchased rotisserie kit. GM172-012 (6 burner model): Install the motor (33) to the motor bracket as shown.
- Page 19 ASSEMBLY INSTRUCTIONS Step 13 Step 14 Attach the regulator to your gas cylinder. Turn on the gas cylinder ensuring that all of the controls on the BBQ are turned OFF at this point. DO NOT ATTEMPT TO LIGHT THE BBQ!!. Step 15 Step 16a Use a solution of soapy water (dishwashing liquid...
-
Page 20: Care And Maintenance
CARE & MAINTENANCE Care & Maintenance Care of Cooking Surface As with all appliances, proper care and maintenance will Use and care of the cooking surface is important. keep them in top operating condition and prolong their life. Do not overheat the cooking surface with the hood down or Your new gas barbecue is no exception. - Page 21 figures - the same principles apply to any other shaped area. the same principles apply to any other shaped area. Gasmate ® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au Gasmate is a registered trademark of: Sitro Group Australia Pty Ltd www.sitro.com.au...
- Page 22 This page has been left intentionaly blank...
- Page 23 This page has been left intentionaly blank...
Need help?
Do you have a question about the Horizon GM172-008 and is the answer not in the manual?
Questions and answers