Advertisement
Eagle Aircraft
Operations Manual and Safety Procedures
6.3.3
All initial instrument checkouts will be performed according to Attachment 2 and CFR
14, 61.51. Instructors will complete an endorsement for an Instrument Proficiency
Check. Subsequent make and model checkouts for pilots with instrument ratings need
not include an Instrument Proficiency Check; however the flight instructor must ensure
the customer has demonstrated the ability to use all installed equipment under IFR
conditions.
6.3.4
Instructors will ensure checkouts are conducted according to this manual and pilots are
able to complete the maneuvers to the standards established in the appropriate FAA
Practical Test Standards for a Private/Instrument Airplane. The intent of the checkout
is to ensure the pilot is capable of meeting the standards, it is not designed as a flight
test. In-flight instruction can be given as necessary; however, the flight instructor must
be confident the pilot is capable of performing each maneuver without intervention or
instruction.. If a pilot cannot perform a maneuver to the required standard you will refer
them to the Chief/.Assistant Chief Flight Instructor to develop an appropriate course of
training. Be sure to emphasize to the customer that this retraining is for their safety
and that all pilots need periodic refresher training to maintain their skills.
7.1
Maintenance Performed
7.1.1
Maintenance will be performed in accordance with FAR part 43 and part 91, by persons
authorized and certificated by part 65. All maintenance will be performed by an
appropriately rated mechanic or repairman approved by Eagle Aircraft DOM.
7.2
100 Hour and Progressive Inspections
7.2.1
100 Hour Inspections or Progressive Inspections prescribed by 14 CFR 91.409 are
required for all aircraft. Aircraft being maintained on a 100hr Inspection program is
Arrow N76SA, Seminole N30101, Skyhawk N21662, Skyhawk N219LM, and
Skycatcher N52030. Aircraft being maintained on a Progressive Maintenance
Inspection program are Skyhawks N5204N and N1449C.
7.3
Time Between Overhaul (TBO).
7.3.1
Aircraft components will be overhauled at the manufacturer's recommended TBO or on
condition.
7.3.2
Actions directed by Airworthiness Directives (ADs) will be performed
Eagle Aircraft
Operation Manual and Safety Procedures
04/25/2012
Page 24 of 56
Maintenance Procedures
FAA Approved
Date:
_
Advertisement
