ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cle ared area and position them on the floor in front of you. Re move all
packing materials from your area and place them back into the box. Do not dispose of the pa cking materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part ple ase
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
parts@staminaproducts.com
STEP 1
Unfold the BASE ASSEMBLY to a n upright position by moving the FRONT FRAME(1) away from the
REAR FRAME(2). Then push down on the middle of the two FOLDING LINKAGES(3) until they are fully
locked down.
STEP 2
Slide one PROTECTIVE COVER(23) onto each side of the BASE ASSEMBLY, and pull the covers down
until the bottom of the covers are slightly lower tha n the FOLDING LINKAGES(3). Secure the PROTECTIVE
COVERS(23) to the FOLDING LINKAGES(3) with the SECURING STRAPS on the bottom of the covers.
NOTE: When the PROTECTIVE COVERS(23) are a ssembled correctly, the FOLDING LINKAGES(3) should
not be visible. Refer to the illustration.
6