Assembly Instructions - Stamina AMRAP 35-1423C Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
STEP 1
Refer to illustration 1. Turn the main assembly of the STAMINA│X AMRAP ROWER upside down and place
it in the packing material styrofoam(A) and (B) to avoid breaking the chain covers. Attach the LEFT and
RIGHT SUPPORT LEGS(7, 8) to the MAIN FRAME(1) with SOCKET HEAD BOLTS(M8x1.25x12mm)
(81) and WASHERS(M8)(79). Do not tighten all bolts until Step 2.
STEP 2
Refer to illustration 2. Attach the FRONT STABILIZER(4) to the LEFT and RIGHT SUPPORT LEGS
(7, 8) with SOCKET HEAD BOLTS(M8x1.25x12mm)(81) and WASHERS(M8)(79). Then tighten all bolts.
Turn the assembly over.
1.
8
2.