Fcc Statement; Trademarks; Preface - SignaMax FO-065-1195 User Manual

F C C S t a t e m e n t
The FCC (Federal Communications Commission) restricts the amount of radio frequency
emission and radiation coming from computer equipment.
The equipment introduced in this manual has been tested and found to comply with the limits for
a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user is required to correct the interference at his/her own expense.
Any changes or modifications not expressly approved by the manufacture would void the user's
authority to operate the equipment.
T r a d e m a r k s
Product names mentioned in this manual may be trademarks or registered trademarks of those
products.
All trademarks or brand names mentioned are properties of their respective companies.
P r e f a c e
This manual describes how to install and use the Signamax™ Gigabit Ethernet Media Converter.
The Converter introduced here provides one channel media conversion solution:
1000BaseT 1000BaseSX/LX
1000BaseSX/LX
The Signamax™ Gigabit Ethernet Media Converter fully complies with IEEE802.3ab
1000BaseT and IEEE802.3z 1000BaseSX/LX Gigabit Ethernet standards.
In this manual, you will find:
Ÿ
Product overview
Ÿ
Features on the media converter
Ÿ
Illustrative LED functions
Ÿ
Installation instructions
Ÿ
Specifications
User's Manual
1000BaseLX
Signamax™ Gigabit Ethernet Media Converter
1