Table of Contents
Advertisement
BioAxs 9750™ Installation & Operations Manual. Version 1.9
Chapter 8: Using the Panel
This chapter will review the typical activation and usage scenarios associated with the BioAxs
9750™ access panel.
Pre-Requisites for Panel Use
Before using your BioAxs 9750™ Access Panel, the following items must be completed:
Hardware Installation
The physical installation of the Access Panel hardware has been completed and tested
(see detailed installation instructions in Chapter 6 of this manual).
Access Panel Activation
An authorized administrator of the Command Center Access Control Software has
activated the BioAxs 9750™ Access Panel (detailed instructions may be found in the
Administration section of the Command Center System Administration and User Guide).
Member Enrollment and Privilege Assignment
Members have been enrolled and privileges assigned to grant access to the facilities
being controlled by the BioAxs 9750™ Access Panel (detailed instructions in the
Enrollments section of the Command Center System Administration and User Guide).
Introduction
The BioAxs 9750™ access panel is designed to achieve maximum flexibility for integrating into
the most diverse range of access control environments. To function properly, fingerprint and/ or
facial templates must be enrolled in the system using the NextgenID Command Center™ Client
software. Use of the BioAxs 9750™ Access Panel is simple and straightforward. The diagram
below illustrates the typical user interface flow for the BioAxs 9750™.
Copyright 2005 NextgenID, Inc. All Rights Reserved
39
Advertisement
Table of Contents
