Mount The Dcm Communications Extender Unit; Install The Fingermatch™ Hardware Licensing Device - NextgenID BioAxs 9750 Installation & Operation Manual

Multi-modal biometric access panel fingerprint recognition with pin and card reader
Table of Contents

Advertisement

BioAxs 9750™ Installation & Operations Manual. Version 1.9
BioAxs 9800IR
Door Commander Unit
REAR VIEW
Fan Exhaust - Do Not Block
Mouse
Keyboard
Monitor
Figure 8 Door Commander Module Rear Panel View

Mount the DCM Communications Extender Unit

Locate and mount the DCM Communications Extender near the DCM
The distance from the Communications Extender to an available USB port on the DCM should
not exceed 6 feet.
Once mounted, connect the DCM Communications Extender to an available USB port located on
the front panel of the DCM using the supplied USB cable.
Figure 9 DCM Communications Extender Connections
Install the FingerMatch™ Hardware Licensing Device
Attach the licensing device to the DCM by plugging it into the USB 2 port on the front panel of the
DCM
Copyright 2005 NextgenID, Inc. All Rights Reserved
Panel Camera Input
(RCA Connector)
CH2
Serial 1
Serial 2
(COM1)
(COM2)
IrisAccess
Frame
Grabber
FGB3000
Input (BNC)
Access Panel
Video Capture Board
Iris Capture
CH1
LAN 1
Power
Input DIN
25

Advertisement

Table of Contents
loading

Table of Contents