Table of Contents
Advertisement
BioAxs 9750™ Installation & Operations Manual. Version 1.9
Locating the Door Commander Module (DCM)
The DCM Module is to be located at a cable distance no greater than 100 Meters (328 ft) from the
BioAxs 9750™ Access Panel. Typical locations for the DCM include building communications
closets, electrical rooms, etc.
Generally, the location should provide the necessary connection points for the power and LAN
requirements of the system.
Options for extending the Access panel to DCM connection distance beyond the 100 Meter limitation
are available Consult with a NextgenID sales representative for availability
Ethernet Connectivity (LAN)
The BioAxs 9750™ Door Commander Module (DCM) requires a network connection to the
NextgenID Command Center™ server across a 10/100 Mb/s Ethernet network. The Command
Center Software allows centralized management and user enrollment of all BioAxs family access
control panels. For a additional information see the accompanying document, NextgenID
Command Center System Administration and User Guide P/N BA-DOC-CCSAUG. A standard
RJ45 Cat 5 Network Jack is provided on the rear panel of the DCM.
Always consult with your NextgenID support representative and/or the local site
Note
Network Administrator before connecting the BioAxs 9750™ system to any existing networks
within a facility to ensure the proper network hardware and software security policies have
been implemented.
Copyright 2005 NextgenID, Inc. All Rights Reserved
13
Advertisement
Table of Contents
