InFocus IN5122 Manual page 35

5.4 Setting the menu - Inputting image to Sub and Main separately
3.
Use the ▲/▼ buttons to highlight SUB INPUT SOURCE, and press the ►
button to display the SUB INPUT SOURCE dialog.
4.
Use the ▲/▼ buttons to highlight FOLLOW MAIN
UNIT, and press the ► button to save the change.
( 23 )
5.
Press the SOURCE button on the remote control
or the SOURCE button on the Main projector's
control panel, the MAIN INPUT SOURCE dialog
is displayed on screen. Use the ▲/▼ buttons
to highlight the port which is connected to the
signal cable, and press the ► button to save the
change.
NOTES • If FOLLOW MAIN UNIT is selected, selecting an input source for
either the Main or Sub projector will cause the other projector to the same
source automatically.
• If FOLLOW MAIN UNIT is selected, LAN, USB TYPE A and USB TYPE B
cannot be selected.
• When FOLLOW MAIN UNIT is selected, if the SOURCE button on the remote
control or the projector's SOURCE button is pressed, the dialog for selecting the
input source will be displayed.
Setting input ports using menu
(continued)
33