Registering, Deregistering, And Resetting The Avaya 7406E Digital Mobile Handset - Avaya 7406E Installation And Configuration Manual

Chapter 4
Registering, deregistering, and resetting the
Avaya 7406E Digital Mobile Handset
This chapter provides procedures for registering the Avaya 7406E Digital Mobile Handset system.
Complete the following procedures in the order in which they are provided to register handsets:
• Setting the base station DIP switches for a single-base station application
• Setting the base station DIP switches for a two-base station application
• Assigning a port ID to a handset
• Registering a handset
• Deregistering one handset
• Deregistering all the handsets
• Resetting a handset
• Changing the maintenance password
Registration requirements
The following details the registration requirements for the base station in four different modes.
• Registration mode: Allows the base station to permanently stay in a Registration mode.
• Normal operational mode: Allows the base station to be in Registration mode for the first
30 seconds of operation and then the base station returns to Normal mode (no registrations
after 30 seconds)
If the user wants to use a handset in Normal mode, then the handset must be registered to
the base in Normal mode. Once completed successfully, there is no registration issue after
the base has been power cycled, providing the dip switch settings are not rearranged.
• A-Group mode: Allows the base station to be in Registration mode for the first 30
seconds of operation and then the base station returns to A-Group mode (no registrations
after 30 seconds)
If the user wants to use a handset in A-Group mode, then the handset must be registered to
the base in A-Group mode. Once completed successfully, there is no registration issue
after the base has been power cycled, providing the dip switch settings are not rearranged.
• B-Group mode: Allows the base station to be in Registration mode for the first 30
seconds of operation and then the base station returns to B-Group mode (no registrations
after 30 seconds)
If the user wants to use a handset in B-Group mode, then the handset must be registered to
the base in B-Group mode. Once completed successfully, there is no registration issue
after the base has been power cycled, providing the dip switch settings are not rearranged.
Avaya 7406E Digital Mobile Handset Installation and Configuration Guide
41