Safety Information - Toshiba e-STUDIO 191F Operating Instructions Manual

Plain paper facsimile
Hide thumbs Also See for e-STUDIO 191F:
Table of Contents

Advertisement

ENGLISH

Safety Information

For Your Safety
To prevent severe injury and loss of life, read this section carefully before using your machine to ensure
proper and safe operation of your machine.
This section explains the Warnings and Cautions used in this Operating Instructions manual.
WARNING
CAUTION
This section also explains the graphic symbols used in this manual.
These symbols are used to alert operators to a specific operating procedure that must not be
performed.
These symbols are used to alert operators to a specific operating procedure that must be
emphasized in order to operate the machine safely.
This symbol is used to alert operators to a heated surface that may cause burns and
requires close attention.
Power and Ground
Connection Cautions
Ensure that the plug connection is free of
dust. In a damp environment, a
contaminated connector can draw a
significant amount of current that can
generate heat and eventually cause fire if
left unattended over an extended period of
time.
Always use the power cord provided with
your machine.
If you use a cord with an unspecified
current rating, the machine or plug may
emit smoke or become hot to the touch
externally.
Do not attempt to repair, pull, bend, chafe
or otherwise damage the power cord. Do
not place a heavy object on the cord. A
damaged cord can cause fire or electric
shocks.
Never touch a power cord with wet hands.
Danger of electric shock exists.
Denotes a potential hazard that could result in serious injury, or death.
Denotes hazards that could result in minor injury, or damage to the machine.
WARNING
When disconnecting the machine, grasp
the plug instead of the cord. Pulling on a
cord forcibly can damage it and cause fire
or electric shock.
If the power cord is broken or insulated
wires are exposed, contact your
authorized TOSHIBA dealer for a
replacement. Using a damaged cord can
cause fire or electric shocks.
Stop operation immediately if your
machine produces smoke, excessive
heat, unusual noise, or smell, or if water is
spilt onto the machine. These conditions
can cause fire. Immediately unplug the
machine, and contact your authorized
TOSHIBA dealer.
5

Advertisement

Table of Contents
loading

Table of Contents