Toshiba e-STUDIO 191F Operating Instructions Manual page 39

5
Make sure that the paper is set properly and it
does not exceed the Max. Level Indicator.
6
Insert the tray into the machine until it stops.
123
NOTE
1. When the optional Tray-2 is installed and the same size of paper is loaded in both trays, the paper will be supplied from
Paper Tray-1 first. This is the default setting, if you wish to change the setting, please consult with your authorized TOSHI-
BA dealer.
2. After setting the maximum allowed number of copies for each department, consult with your Key Operator when the total
copy count reaches the designated limit and the "MAX COPIES ALLOWED" message appears on the LCD.
3. If output sheets are curled, or not properly aligned, remove the paper from the paper tray, turn it over, and replace it in
the paper tray.
Replacing Consumables
39