Scrub Controls - Windsor iExtract 26 Duo Operating Instructions Manual

Operations

Scrub Controls

1. Function Mode Dial
The first two positions are for transport only. See drive controls section.
A1-Interim Mode-Slow
This mode is used for interim cleaning. In this mode the machine will propel at slow speed. The brush deck
will automatically lower to contact the floor. The water will flow at a low rate set by the controller. Water will
automatically shut off in neutral and resume as machine propels forward. The vacuum shoes will remain off
the floor and the vacuum motors will be off in this mode.
A2-Interim Mode-Fast
This mode is used for interim cleaning. In this mode the machine will propel at fast speed. The brush deck will
automatically lower to contact the floor. The water will flow at a low rate set by the controller. Water will auto-
matically shut off in neutral and resume as machine propels forward. The vacuum shoes will remain off the
floor and the vacuum motors will be off in this mode.
B1-Deep Extraction-Slow
This mode is used for deep carpet extraction. In this mode the machine will propel at slow speed. The brush
deck will automatically lower to contact the floor. The vacuum shoes will automatically lower to the floor and
the vacuum motors will turn on. The water will flow at a high rate. Water will automatically shut off in neutral
and resume as machine propels forward. The vacuum shoes will lift off the floor in reverse with the vacuum
motors having a delayed shut off to clear the hoses.
18 86372820 Chariot 3 iExtract 26 Duo
2
1