Connecting Video Components - JVC RX-ES9SL Instructions Manual

Connecting video components

Turn off all components before making connections.
• Illustrations of the input/output terminals are typical examples.
When you connect other components, refer also to their manuals
since the terminal names actually printed on the rear vary among
different components.
Digital connection
DIGITAL 3 DIGITAL 2
(DVD) (STB)
VR AV IN /OUT TV
DIGITAL 3 DIGITAL 2
(DVD) (STB) DIGITAL IN
DVD AV IN STB
SUBWOOFER
OUT
Before connecting
an optical digital
cord, unplug the
protective plug.
NOTES
• When shipped from the factory, the DIGITAL IN terminals have been set for use with the
following components:
– DIGITAL 1 (VR) (coaxial): For VR (VDR)
– DIGITAL 2 (STB) (optical): For STB (Set Top Box)
– DIGITAL 3 (DVD) (optical): For DVD player
If you connect other components, change the digital input (DIGITAL IN) terminal setting
correctly. See "Setting the digital input (DIGITAL IN) terminals—DIGITAL IN" on page 19.
• Select the correct digital input mode.
See "Selecting the analogue or digital input mode" on page 11.
01-10_RX-ES9SL[B]f
Digital optical cord (not supplied)
DIGITAL 1
(VR)
DIGITAL IN
Digital coaxial cord
(supplied: 1 cable)
CENTER SURROUND FRONT
DIGITAL 1
SPEAKER SPEAKERS SPEAKERS
(VR)
RIGHT LEFT RIGHT LEFT
CAUTION:
SPEAKER
IMPEDANCE
8 ~ 16
7
CAUTION:
If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.
OPTICAL
DIGITAL OUT
COAXIAL
DIGITAL OUT
03.6.27, 16:45
Getting started
DVD Player
STB (Set Top Box)
VR (VDR)
7