Connecting The Power Cord - JVC RX-ES9SL Instructions Manual

Getting started
Analogue connection for DVD MULTI playback (see page 34)
FM 75
AM LOOP
ANTENNA
COAXIAL
AM EXT AUDIO
CENTER
L L
R R
DVD
SUB
SURR
IN FRONT
WOOFER (REAR)
CENTER
L
R
DVD
SUB
FRONT
IN
WOOFER

Connecting the power cord

Before plugging the power cord into an AC outlet, make sure that all connections have been made.
Plug the power cord into an AC outlet.
Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.
We recommend that you use a coaxial cable to connect the antenna, since it is well-shielded against interference.
NOTE
The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:
– When you unplug the power cord.
– When a power failure occurs.
CAUTIONS:
• Do not touch the power cord with wet hands.
• Do not alter, twist or pull the power cord when disconnecting it, or put anything heavy on it, which may cause fire, electric shock, or other
accidents.
10
01-10_RX-ES9SL[B]f
CENTER SURROUND FRONT
VR AV IN / OUT TV DIGITAL 1
SPEAKER SPEAKERS SPEAKERS
(VR)
RIGHT LEFT RIGHT LEFT
DIGITAL 3 DIGITAL 2
DIGITAL IN
(DVD) (STB)
DVD AV IN STB
CAUTION:
SPEAKER
SUBWOOFER IMPEDANCE
8 ~ 16
OUT
Stereo audio cord
AUDIO
(not supplied)
L
R
SURR
(REAR)
Stereo audio cord (not supplied)
10
DVD player with 5.1 channel
analogue discrete jacks
Monaural
audio cord
(not supplied)
Monaural audio cord
(not supplied)
NOTE
When using the DVD MULTI playback, use the same DVD player
connected to this receiver by a SCART cable. If you connect a
different DVD player, the mixed sound from front left and right
channels are reproduced.
03.6.27, 16:45
To center channel audio output
To surround left channel audio
output
To surround right channel audio
output
To subwoofer output
To front right channel audio
output
To front left channel audio output