Technical Specifications; Conformity Certificates - Husqvarna 150D Operator's Manual

Weight and Dimensions 150D
Weight – dry
Weight with gasoline and oil full
Length (handle folded in)
Width
Height
Blade
Material cut
Blade type
Blade rotation
Blade shaft speed
Cutting distance from wall
Engine:
Engine oil volume
Gasoline tank volume
Type
Air filter
Oil system
Muffler
Emissions
Cooling
Cylinder
Controls
Starting system
CALIFORNIA AIR RESOURCES BOARD (CARB): This machine is considered a preempt Off-Road
Ap plication as relating to CARB standards. Under construction equipment, and in particular, as a Saws :
concrete, masonry, cutoff, with engine power less than 19KW (25hp), CARB standards do not apply to this
machine.
For more information see the website http://www.arb.ca.gov/msprog/offroad/preempt.htm

TECHNICAL SPECIFICATIONS

CONFORMITY CERTIFICATES

96 lbs 43.5 kg
100 lbs 45.4 kg
34 inch 864 mm
19 inch 483 mm
21 inch 533 mm
Control joints on cured concrete only
6.0 inch (152 mm) ProEdge Radius and Bevel blades
Counter clockwise, upcutting
4450 rpm
4.5 inch 114 mm
Robin EX 13
0.6 quarts 0.6 liters
0.7 gal 2.7 liters
Air cooled, 4-cycle, single slant cylinder, overhead
camshaft, gasoline engine
Cyclonic type
Oil alert with auto shut down sensor
Silent type 75 dbA, exhaust deflector, spark arrestor
Complies with EPA Phase 2 and CARB Tier II USA
regulations
Air cooled with internal and external cooling fins
Aluminum with cast iron liner
Engine manual throttle, choke and fuel shut off levers,
manual on/off switch
Manual recoil starter with automatic mechanical
compression release and zero kick back
16