Technical Data - Husqvarna K 540i Operator's Manual

Technical data

Husqvarna K 540i
Voltage d.c. maximum/nominal, V
Weight, kg/lbs
Maximum cutting depth, mm/in.
Maximum blade diameter, mm/in.
Maximum blade thickness, mm/in.
Blade shaft, rpm no load
Water cooling of blade
Connecting nipple
Recommended water pressure, bar/psi
Maximum water pressure, bar/psi
1
Vibration levels, a
hveq
2
10" Front, m/s
2
10" Rear, m/s
2
Noise emissions
LpA, dB(A)
LwA, dB(A)
Noise and vibration declaration
statement
These declared values were obtained by laboratory
type testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
Embedded connectivity
Note:
This part is applicable only for products
supplied with embedded connectivity.
BLE technology radio spectrum
Frequency bands for the tool, GHz
1
Equivalent vibration level, according to EN 60745-2-22, is calculated as the time-weighted energy total for
vibration levels. Reported data for vibration levels has an uncertainty of 1 m/s
2
The noise emission are measured in accordance with EN 60745-2-22. Uncertainty for the A-weighted sound
power level K
wA
1960 - 002 - 25.08.2023
Technical data
Abrasive blades
Diamond blades
is 3 dB(A). Uncertainty for the A-weighted sound pressure level K
40/36
4.2/9.3
100/3.9
267/10.5
3.0/0.12
1.6/0.06
5500
Yes
Type "Gardena"
0.5–6/72.5–87.0
6/87
3.7
2.4
101.5
112.7
values are not suitable for use in risk assessments
and values measured in individual work places may
be higher. The actual exposure values and risk of
harm experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
2.402-2.480
2
.
is 3 dB(A).
pA
31