Technical Specifications - Husqvarna FS 1000 E Operator's Manual

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Technical specifications

The table below gives the technical specifications for the floor
saw. It is extremely important that you check these before:
- Choosing a floor saw.
- Choosing and fitting a diamond blade.
- Connecting to the mains supply.
- Choosing a power cable.
- Choosing the cutting depth.
- Transporting the machine.
If you are unsure about the meaning of the technical specifica-
tions or ordering spare parts, please contact your supplier.
FS 1000 EM ART. NO. 50040
Motor rating
Voltage and type of supply
Power cable
Polarity
Phase inverter
Drive shaft speed
Max. peripheral speed.
Max. diamond blade diameter
Parking brake
Base plate equipment
Chain drive equipment
Max. Cutting depth
Length approx.
Width approx.
Height approx.
Weight (excl. blade) approx.
Noise
Noise
Vibration
kw 11
V/phase/Hz 400/3/50 or
220/3/50
REVE 5x6
Europa plug 32 Amp.
separate knob
rpm 965
m/s 63
mm 1000
yes
standard
standard
mm 420
mm 1750
mm 780
mm 1120
kg 275
noise power Lw <101.7
rel. pw according
to ISO 744 dB(A)
noise pressure <84.8
Lp rel. 0µPa at
ear during
operation B(A)
according to 0.8 m/s2 (H/A)
ISO 7505
10