Technical Specifications; Conformity Certificates - Husqvarna 5000 Operator's Manual

Table of Contents

Advertisement

Weight and Dimensions 5000
Weight – dry
Weight with gasoline and oil full
Length
Width
Height
Blade
Material cut
Blade type
Blade rotation
Blade shaft speed
Cutting depth
Cutting distance from wall
Average cutting rate - Estimate only. Speed will vary with job conditions and concrete mixes.
4 inch (101 mm) depth
Soft aggregates
16 ft/min (4.9 m/min)
Medium aggregates
12 ft/min (3.7 m/min)
Hard aggregates
8 ft/min (2.5 m/min)
Blades are available in 14.0 inch (355 mm) and 12 inch (305 mm) diameters and in 0.100 inch (2.5 mm),
0.250 inch (6.4 mm), 0.380 inch (9.7 mm), and 0.500 inch (12.7 mm) widths
Engine:
Engine oil volume (with filter)
Gasoline tank volume
Type
Air filter
Oil system
Muffler
Emissions
Cooling
Cylinder
Controls
CALIFORNIA AIR RESOURCES BOARD (CARB): This machine is considered to be construction equipment
with engine power equal or greater than 19KW (25hp), CARB standards do not apply to this machine.
For more information see the website http://www.arb.ca.gov/msprog/offroad/preempt.htm

TECHNICAL SPECIFICATIONS

CONFORMITY CERTIFICATES

507 lbs
230 kg
531 lbs
241 kg
59 inch
1499 mm
30 inch
762 mm
38 inch
965 mm
Green concrete only
14.0" (355 mm) or 12.0" (305 mm) dry cut with tri-arbor
Counter clockwise, upcutting
2750 rpm
4 inch maximum (101 mm) depending on blade size and
amount of blade wear
3 1/2 inch
89 mm
3 inch (76 mm) depth
24 ft/min (7.3 m/min)
17 ft/min (5.2 m/min)
10 ft/min (3.0 m/mim)
Kohler Command Pro CH740
2.1 quarts
2.0 liters
3.0 gal
11 liters
Air cooled, 4-cycle, twin cylinder, hydraulic overhead
valves, gasoline engine
Tri phase remote mount canister style
Full pressure lubrication with spin-on oil filter
Low noise, side exhaust
Complies with EPA Phase 2 and CARB Tier II USA
regulations
Air cooled
Aluminum with cast iron liner
Instrument panel mounted manual choke, electric switch
operated throttle, keyed on/off switch
16
2 inch (51 mm) depth
32 ft/min (9.8 m/min)
22 ft/min (6.7 m/min)
12 ft/min (3.7 m/min)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents