How To Disassemble - Daewoo DWC-070C Service Manual

8. HOW TO DISASSEMBLE

Please refer to the chapter 11 (Exploded diagram and parts list).
1 Before service of
any part.
2 Ass'y Fan Motor
- Fan Motor
- Propeller Fan
- Blower Fan
3 Ass'y Control Box
- Rotary Switch (selector)
- Thermostat
- Capacitor
- Power Cord
4 O.L.P
1. Stop the unit, remove the power cord from the receptacles.
2. Move the unit to the safe location for the suitable work.
1. Remove Front Grill
- Remove Filter Pre.
- Remove screw(1 point) in Front Grill.
2. Remove Cabinet from the unit.
- Remove screws (8 point) from the unit's sides.
3. Remove Scroll upper.
4. Remove Plate Scroll
- Remove screws (3 point) from Plate Scroll's sides.
5. Remove Ass'y Control Box
- Remove screws (3 point).
- Remove wires in the each components.
6. Remove wires in the Panel Housing.
7. Remove screws (7 point) from Ass'y Fan Motor's sides.
- Ass'y Fan Motor is assembly of Fan Motor, Propeller and Blower Fan, Orifice
and Panel Housing.
8. Lift the Ass'y Fan Motor from the unit.
9. Remove hex-nut (2 point) from the shaft of Fan Motor.
10. Remove Propeller Fan from the shaft of Fan Motor.
11. Remove Blower Fan from the shaft of Fan Motor.
12. Remove Fan Motor from Panel Housing.
- Remove screws (4 point).
1. Same as the procedure 1 to 5 in the Item 2.
1. Same as the procedure 1 to 2 in the Item 2.
2. Remove Terminal Cover from Compressor.
- Remove hex-nut (1 point).
10