Connecting The Fm Antenna - JVC UX-5000 Instructions Manual

CAUTION: Make all connections before plugging the System into an AC power outlet.

Connecting the FM Antenna

AC IN
Connecting the AM (MW/LW) Antenna
AC IN
Using the Supplied Wire Antenna
R L
Using the Coaxial Type Connector (Not Supplied)
$ýæèðRKPýDQWHQQDýZLWKýFRD[LDOýW\SHýFRQQHFWRUýõ',1éèýêêëôýVKRXOG
EHýFRQQHFWHGýWRýWKHý)0ýæèðRKPý&2$;,$/ýWHUPLQDOï
,IýUHFHSWLRQýLVýSRRUñýFRQQHFWýWKHýRXWVLGHýDQWHQQDïý
Note: Before attaching a 75 ohm coaxial lead (the kind with a
CAUTION: To avoid noise, keep antennas away
from the System, the connecting cord and the AC
power cord.
R L
FM wire antenna (supplied)
Coaxial cable
round wire going to an outside antenna), disconnect the sup-
plied FM Wire Antenna.
AM loop antenna (Supplied)
Attach the AM loop to its base by snapping the tabs on the
loop into the slot in the base.
AM EXT
AM LOOP
Turn the loop until you have the best reception.
FM outdoor antenna
(option)
3