Common Operations - JVC UX-5000 Instructions Manual

COMPU PLAY
JVC's COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, turn on the radio, or listen to an external equipment with a single press of the play button for
that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD
in place), the System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
38
CD button
TUNER BAND button
MD/TAPE button
AUX button

Common Operations

REMOTE CONTROL RM-RXU5000
DIMMER SLEEP
DIMMER
DISPLAY FM MODE AUX
DISPLAY
AHB. AUTO
CD
SUPER PRO PRESET
AHB SUPER
PRO
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
BASS
TREBLE
UP
SET
DOWN
MD TUNER
CD
/TAPE BAND
VOLUME+,–
VOLUME
Turning the Power On and Off
Turning the System On
Press the button.
The display comes on and the STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in when
the power was last turned off.
For example, if the last thing you were doing was listening to a
CD, you are now ready to listen to a CD again. If you wish, you
can change to another source.
If you were listening to the Tuner last, the Tuner comes on playing
the station it was last set to.
Turning the System Off ——————
Press the button again.
The STANDBY indicator lights up and the display is blank, except for
the clock display.
6
On the Remote Control
38
CD button
TUNER BAND button
MD/TAPE button
AUX button
AHB
AHB. PRESET
SUPER PRO TUNING DOWN
SUPER PRO
AUX
——————
STANDBY
STANDBY
SLEEP
MULTI CONTROL UP CLOCK
CLOCK
OPEN/CLOSE
CD
TUNER
MD/TAPE
BAND
TIMER/SNOOZE
Some power (5W) is always consumed even though power is
turned off (called Standby Mode).
To switch off the System completely, unplug the AC power cord
from the AC outlet. When you unplug the AC power cord, the
clock will be reset to 0:00 after about 20 minutes, and preset Tuner
stations will be erased after about 24 hours.
Adjusting the Brightness
(DIMMER)
You can adjust the brightness of the display.
To make the display brighter, press the DIMMER button on the
Remote Control.
To make the display darker, press the DIMMER button on the
Remote Control again.
• The brightness of the volume illumination is also adjusted.
In Standby mode, the normal brightness is the same as the darker
brightness for the powered System. When you press the DIMMER
button in Standby mode, the brightness becomes further darker.
In standby mode, the volume illumination does not light.
STANDBY
VOLUME indicator
STANDBY
VOLUME
Volume
illumination
PHONES
ULTRA MICRO COMPONENT SYSTEM
UX-5000
PHONES