Edit Mode - Musicom Lab EFX MKII User Manual

④
Press the MODE switch. The display will show:
And the 4 LEDs above PS-1 ~ PS-4 switches will indicate the respective Loop5 ~ Loop8 as
on or off.
⑤
Press the PS-1 through PS-4 switches to turn the respective Loop5 ~ Loop8 on or off. The
respective LEDs will go on or off.
⑥
Press the BANK UP switch to store the edit and return to Preset Mode. The other side, press
the BANK DOWN switch to return to preset mode without storing the edit.
⑦
Follow the same procedure

3.3 Edit Mode

The Edit Mode contains the utility functions. To enter the Edit Mode, you must be in the Preset
Mode. Press/hold the MODE switch to enter the Edit Mode for 1 second. The display will show:
Press/hold the PS-1 switch(FS, function select) to scroll the utility functions. Below is a list
functions in the order that they are shown.
Function Select Order List
PC1 sets 1st MIDI Program Change
PC2 sets 2st MIDI Program Change
PC3 sets 3st MIDI Program Change
PC4 sets 4st MIDI Program Change
PC5 sets 5st MIDI Program Change
CC1 sets 1st MIDI Control Change for the Loop1 On/Off
CC2 sets 2st MIDI Control Change for the Loop2 On/Off
CC3 sets 3st MIDI Control Change for the Loop3 On/Off
CC4 sets 4st MIDI Control Change for the Loop4 On/Off
CC5 sets 5st MIDI Control Change for the Loop5 On/Off
CC6 sets 6st MIDI Control Change for the Loop6 On/Off
CC7 sets 7st MIDI Control Change for the Loop7 On/Off
CC8 sets 8st MIDI Control Change for the Loop8 On/Off
EPL sets MIDI Control Change for the continuous control port XPDL
LP7 / Ct7 selects the audio Loop 7 or Control Function 7
LP8 / Ct8 selects the audio Loop 8 or Control Function 8
bon / boF selects the input buffer on or off
Pr0 ~ Pr9 selects 10-stage popping noise reduction control
EFX MkII Audio Controller User Manual
① ⑥
~ for any other presets you want to program the loops.
6