Before / During Transportation - KTM 125 SX 2010 Owner's Manual

4-5
– T
HE PENETRATION OF DIRT INSIDE OF THE EXTERNAL TANK MUST BE AVOIDED AS MUCH AS POSSIBLE
,
LID OF THE EXTERNAL TANK
– B
E CAREFUL WHEN LOWERING A DAMPER INTO THE EXTERNAL TANK
MALFUNCTION OF THE VACUUM FILLING INSTALLATION
– N
EVER HANG A DAMPER FROM THE DAMPER CONNECTOR OF THE VACUUM FILLING DEVICE
– T
HE INSTALLATION CAN BE CLEANED WITH A MILD SOAP
.
INSTALLATION
– I
F AT ANY TIME YOU FEEL UNCERTAIN OF THE VACUUM FILLING OF A DAMPER
1
2
CAUSING A MALFUNCTION OF THE VACUUM FILLING INSTALLATION
.
,
DO NOT USE AGGRESSIVE PRODUCTS AS THESE MIGHT DAMAGE THE STICKERS ON THE
.
. D
AMAGING THE TOP OF THE TANK MAY RESULT IN AIR LEAKAGE
!
,
START OVER AGAIN TO ENSURE SAFETY

Before / during transportation

– Disconnect the power and air supply. The oil in the vacuum pump
and the damper-oil in the oil reservoir should always be drained
before transportation. For draining the oil reservoir, connect filling
adapter A to the damper connector of the filling unit while
1
holding the adapter above a measuring cup.
– Let the oil run out of the reservoir. When there is no more oil
flowing, disconnect the filling adapter.
– For draining the vacuum pump-oil, unscrew the draining plug
let the oil flow into a measuring cup. When the oil is drained, place
back the draining plug.
!
T
HE INSTALLATION MUST BE TRANSPORTED IN AN UPRIGHT POSITION AND MUST BE
PROTECTED AGAINST EXTERNAL FORCES
,
PARTS SO HANDLE WITH CARE PROTECT THE INSTALLATION AGAINST SHOCKS ETC
. T
HE DIRT MAY CLOG UP THE FILTER IN THE
.
CAUTION !
. T filling device
HE CONTAINS SENSITIVE
,
AND THUS A
and
2
.