Emc Fan/Outlet Filter - Rittal SK 3237.xxx Assemble And Operating Instructions

12 EMC fan/outlet filter

To achieve EMC protection, the EMC fans
and EMC outlet filters should be snapped
into the mounting cut-out and screw-
fastened using the supplied screws.
Next, the four contact foils should be stuck
on all-round between the fan-and-filter unit
and the inside of the enclosure as shown
in the following illustration.
Fig. 10: EMC contact foils
Note:
Only use original EMC filter
mats (see Accessories in the
Rittal Catalogue).
Rittal fan-and-filter unit assembly and operating instructions
12 EMC fan/outlet filter
EN
17