Installing The Network Adapter; Installing The Cisco Drivers - Noraxon TeleMyo 2400T V2 User Manual

Noraxon U.S.A., Inc.
Step #3 INSTALLING THE PCMCIA CARD SOFTWARE for Windows XP and
MyoResearch XP
Refer to Appendix A if you are using Windows 98 and/or MyoResearch.
NOTE: Due to the variety of Windows XP versions, there may be some slight inconsistencies in these
directions.
A. Installing the Network Adapter
1. With your computer turned off, insert the Noraxon Wireless PC LAN Card (Cisco Card) into an open
PCMCIA slot on your computer. Windows XP will automatically recognize the card.
B. Installing the Cisco Drivers
P-2308TV2 Rev G (06-06-11)
TeleMyo 2400T V2
1. Insert the Cisco Card
into the Computer
2. Cancel out of "Add
New Hardware" Wizard
3. Insert MyoResearch XP
CD or the Driver CD that
was sent with the system.
4. Click on "Install Cisco
Drivers"
5. Select your card from
the two shown on the
screen.
NOTE: The
distinguishing factor is
the gold colored strip on
the bottom of the card in
the second picture.
7