Noraxon TeleMyo 2400T V2 User Manual page 27

Noraxon U.S.A., Inc. TeleMyo 2400T V2
3) In the Hardware Setup screen, the
3
"Demo driver" is pre-selected in the
Hardware Device panel.
4) Scroll down in the Hardware
4
Device panel and click on the
TeleMyo 2400T icon.
5) In the A/D Input panel, click
"Settings".
5
6) In the displayed window, uncheck
"Use first "wireless" adapter".
Instead, select the correct network
adapter in the pull down menu. Click
OK.
7
7) Click on "Settings" again (see
step 5), then in the displayed
6a
window, click "Test Transmitters".
This will allow you to check if the
transmitter is communicating with
the computer and MRXP.
6b
P-2308TV2 Rev G (06-06-11)
26