Noraxon TeleMyo 2400T V2 User Manual page 50

Noraxon U.S.A., Inc.
17. Restart your computer.
18. Install the 'Aironet Client Utilities'. Locate and open the 'Aironet Client Utility' folder on the
MyoResearch 2.11 Installation disk. Double-click the 'Setup.exe' file located inside.
19. At the 'Welcome' screen, click 'Next'.
20. In the 'Select Program Folder' screen, click 'Next'.
21. In the 'Setup Complete' screen, select 'Finish' to end the installation process.
22. Close all open Windows and return to the Desktop.
23. Restart your computer and double click on the 'Aironet Client Utility (ACU)' icon.
24. Select the 'Profile Manager' located in the toolbar.
25. In the 'Profile Management' box select the 'Add' button. Enter the word "Noraxon" next to the
flashing indicator and press 'Enter'. A new window will open.
26. Select the 'System Parameters' tab and type "TELEMYO" in the parameter titled 'SSID1'. The
'Client Name', 'SSID2' and 'SSID3' should be blank. In the 'Network Type' box select 'Ad
Hoc'. Press 'OK' to leave this window.
27. Press 'Apply' in the 'Profile Manager' window to accept all settings. If 'Noraxon' is not already
selected in the 'Profile Management' box, do it now. Press 'OK'.
28. Restart your computer, then open the 'MyoResearch 2.11' folder on the MyoResearch disk and
double-click the 'setup.exe' file. Follow the on-screen instructions to install the software.
29. Restart your computer, then double click on the 'MyoResearch' icon. In the 'A/D setup' window,
select 'MyoAiro Wireless Device'. In the 'Channel Setup' window, select 'TeleMyo 2400'.
30. Finally, verify that your Noraxon Wireless PC LAN card has been installed correctly by verifying
that its green indicator light blinks.
P-2308TV2 Rev G (06-06-11)
TeleMyo 2400T V2
49