Establishing Measurement - Noraxon TeleMyo 2400T V2 User Manual

Noraxon U.S.A., Inc.

Establishing Measurement

TeleMyo 2400T transmitter w/ Noraxon Wireless PC LAN Card
Before a measurement can be taken, a few steps must be followed to configure the Noraxon software to
allow TeleMyo 2400T measurements. If you are using MyoResearch or MyoClinical, please refer to
Appendix B.
To setup the software, open MyoResearch XP.
The steps to get to the Hardware Setup Screen are slightly different for the Application Protocols and
Clinical Application Protocols icons vs the Master icon. However, once the Hardware Icon is reached, the
steps are the same.
Applications Protocol Icon or Clinical Application Protocols Icon:
P-2308TV2 Rev G (06-06-11)
TeleMyo 2400T V2
1) From the Choice of Protocols
Screen, click "Measure".
1
33