Telemyo 2400T Introduction; Telemyo 2400T Setup; Telemyo 2400T Components - Noraxon TeleMyo 2400T V2 User Manual

Noraxon U.S.A., Inc. TeleMyo 2400T V2

TeleMyo 2400T Introduction

The TeleMyo 2400T is the latest generation of Noraxon telemetry products. Each transmitter can
accommodate eight (8) channels of any combination of sEMG and a variety of analog signals. Multiple
transmitters can be coupled together to provide additional channels. The active electrode leads use
Noraxon's patented signal processing technology to provide clear, consistent, and reliable data. The
TeleMyo 2400T System operates as an IEEE 802.11b wireless local area network. Communication is bi-
directional, using an internationally accepted direct sequence spread spectrum 2.4GHz radio channel.
The 2400T transmitter/PC Card combination allows the user to collect data using only two small
components and a computer. Once acquired, all data remains in a digital format. An optional receiver unit,
the TeleMyo 2400R, is available for users who require data in an analog format.

TeleMyo 2400T Setup

Step #1 – UNPACK ALL ITEMS AND CHECK INVENTORY
The following items should be included with the TeleMyo 2400T transmitter (see following figures).
1. TeleMyo 2400T transmitter device
2. Detachable antenna
3. EMG patient leads – (Number of leads depends on number of channels purchased)
4. Battery charger with country specific power cord
5. Noraxon Wireless PC LAN card device and software on CD
6. Transmitter carrying case with waist belt
7. Transmitter-to-transmitter Sync cable (Only used on multi-transmitter systems)

TeleMyo 2400T Components

1. TeleMyo 2400T V2 transmitter with antenna
P-2308TV2 Rev G (06-06-11)
4