KVH Industries TracPhone V11 Installation Manual page 9

4 Prepare the Belowdecks Units
If you plan to use an existing equipment rack,
follow these steps to secure the equipment in the
rack.
a. Remove the four #6-32 screws and washers
securing the two retaining straps to the sides
of the modem. Do not remove the top screws
securing the straps to the CommBox-ACU.
b. Attach the supplied strain-relief bracket to
the retaining straps and modem using the
screws and washers you removed in Step a
(see Figure 10).
c. Insert the CommBox-ACU/modem assembly
into the rack and secure the front mounting
brackets to the rack using four M6 screws and
washers (see Figure 11).
8
Figure 10: Attaching the Strain-Relief Bracket
CommBox-ACU
Retaining
Strap (x2)
Tie-Wrap Strain-Relief
Holes (x42) Bracket
Figure 11: Securing the CommBox-ACU/Modem in the Rack
CommBox-ACU
Modem
Attach to Rack
M6 Screw (x4)
Plastic Washer (x4)
Rack Mount
Modem
#6-32 Screw (x4)
#6 Washer (x4)