KVH Industries TracPhone V11 Installation Manual page 31

16 Continued
c. At the TracPhone V11 web interface, click the
Settings tab. Then click No-Transmit Zones.
d. Click Edit.
e. Make sure Enforce Zones is selected (see
Figure 58).
f. Enter the azimuth and elevation ranges for
Zone 1.
g. Enter the azimuth and elevation ranges for
Zone 2, if required.
h. Click Save Settings.
i. At the confirmation message, click Save.
30
Set Up No-Transmit Zones
Figure 58: No-Transmit Zones Page of Web Interface