3.3 How to control the On-Screen Menu Utility
Joystick left or right
Joystick up or down
Joystick down
Zoom handle twist
CTRL + Joystick
3.4 Auto Scan
(First Item of the Main menu / Shortcut: SCAN)
The Auto scan supports up to 4 programmed angles at user-programmable speeds. Follow
these steps to program Auto Scan:
SPEED (MODE) :
Action
MENU
ESC
AUTO SCAN SETUP
SCAN 01
SPEED(MODE) : FAST VECTOR
START ANGLE : 127.1, 027.7
END ANGLE
SCAN DIR.
SWAP
SAVE AND EXIT (ESC TO CANCEL)
HOLD DOWN CTRL KEY
WHILE SELECT POSITION.
NORMAL1~NOMAL9, SLOW VECTOR, FAST VECTOR
NORMAL1 (SLOWER) ↔ NORMAL9 ( FASTER)
The zoom is fixed at wider angle and the zoom magnification information
is not displayed.
In the vector mode, the dome moves from start point to end point including
tilt linearly.
Call the On-screen menu utility
Go into the sub-menu items.
Execute the command (exit)
Change value.
Navigate through the menu items.
Navigate through the menu items.
Finish editing title.
Change value.
Enter editing title mode.
Change value of angle
Escape (EXIT)
: AUTOSCAN01
: 157.7, 080.7
: CCW
: OFF
12
Function