Table of Contents
Advertisement
On the PTZ control panel of Internet Explorer remote preview interface, call Preset 95
and click
. This will take you to see the following main menu setup.
The menu setup can be displayed when the resolution of the live is set to
1920×1080.
After you go to the main menu interface, you can select the menu by clicking the
direction button (
：moving up and down into the menu.
：to return to the menu.
：to confirm, to enter sub-menu or to select the menu on the right.
Note: dash (-) before the menu means that the menu is not available. Different models
may have different menus. The menus in this manual are for reference only.
3.1 System Information
Select System Information by clicking
enter into the menu as shown below:
You can view the software and firmware version, camera, system temperature, date,
dome ID, dome protocol and baud rate here.
3 Menu Setup
).
or
button, then click
10
button to
Advertisement
Table of Contents
