Opening The Door - Piazzetta P957 Instructions For Installation And Use Manual

Sensor
Connected to the rear of the stove, it constantly monitors the temperature
in the immediate vicinity of the stove to ensure that it can be operated in
all safety.
If the sensor is momentarily or accidentally removed from its normal
position, the problem does not require the immediate shutdown of the
Room sensor
stove, which will continue to operate normally at the set power level.
The problem will be indicated on the display by the readout "TON".
• Put the sensor back in its proper position.
• If the room temperature display has been activated, it will once again
be shown.

6.20 OPENING ThE dOOR

a
During operation the door must remain closed.
It is to be opened only when the stove has been shut down and
cooled for the carrying out of maintenance.
The appliance is fitted with a concealed handle in the bottom right part
of the door and with a DOOR HANDLE TOOL (detachable handle) that
after the use shall be placed on the rear panel of the stove as show in
the figure.
The DOOR HANDLE TOOL, which is standard supply, must be used to
open the door as follows:
- hold the door handle tool in the position as shown in the figure;
- position the tool in a straight line from left to right, checking that the
handle remains inserted between the tabs of the tool;
- pressing gently downwards, rotate everything from left to right.
50
STOVE ROOM TEMPERATURE SENSOR
Description
WHEN ACTIVATED
WHAT TO DO
Fig. 57
Fig. 58
HANDLE
H07025700/DT2000725 – 01
Display
L E V E L
P 2
1 2 : 0 0
1
DOOR HANDLE TOOL
T O N
DT2040055-03
DT2010087-04
DT2033382-00
DT2031536-00