Removing And Installing Engine Control Unit, Golf; Removing And Installing Anti-Theft Engine Control Unit, Golf - Volkswagen Golf Plus 2005 Service Manual

Golf 2004 ➤ , Golf Plus 2005 ➤
4-cylinder diesel engine (1.9 l engine) - Edition 01.2009
2.3 Removing and installing engine control
unit, Golf
– Before removing engine control unit, read the control unit iden‐
tification and thus the coding of the current control unit.
⇒ page 179
Removing
– Switch off ignition.
– Remove wiper arms, plenum chamber cover and plenum
chamber bulkhead: ⇒ Electrical system; Rep. Gr. 92 ; Wind‐
screen wiper system; Removing and installing windscreen
wiper system .
– Bend catch open slightly -1-.
– Then push engine control unit out of retainer -arrow-.
– Now release connector on engine control unit and pull off con‐
nector.
Installing
– Fit connector to engine control unit and lock connector in po‐
sition.
– Push engine control unit onto bracket.
– Press catch -1- against engine control unit.
– Install plenum chamber bulkhead, plenum chamber cover and
wiper arms ⇒ Electrical system; Rep. Gr. 92 ; Windscreen
wiper system; Removing and installing windscreen wiper sys‐
tem .
2.4 Removing and installing anti-theft en‐
gine control unit, Golf
Removing and installing anti-theft engine control unit Golf Plus
⇒ page 183 .
Special tools and workshop equipment required
♦ Electric cutter -V.A.G 1561 A-
♦ Saw set -V.A.G 1561/14-
180
Rep. Gr.23 - Mixture preparation - injection