Volkswagen Golf Plus 2005 Service Manual page 34

Golf 2004 ➤ , Golf Plus 2005 ➤
4-cylinder diesel engine (1.9 l engine) - Edition 01.2009
– Push sealing lip support ring -A- downwards in direction of ar‐
row until it lies on flat surface.
– Upper edge of sender wheel and front edge of sealing flange
must align -arrows-.
– Place sealing flange with front side on assembly tool -T10134-
so that locating pin -A- can be inserted in sender wheel hole
-A-.
Note
Ensure sealing flange lies flat on assembly device.
– Push sealing flange and support ring for sealing lip -B- against
surface of assembly device -T10134- whilst tightening the
three knurled screws -A- so that locating pin cannot slide out
of sender wheel hole.
Note
When installing sealing flange, ensure that sender wheel remains
fixed in assembly device.
2.4.4 B - Attaching assembling tool -T10134-
with sealing flange on crankshaft flange
• Crankshaft flange must be free of oil and grease.
• Engine positioned at TDC No. 1 cylinder
28
Rep. Gr.13 - Crankshaft group