Setting Up The Unit - Panasonic KX-UT113 Operating Instructions Manual

Installation and Setup
1.
this unit may not cause interference, and
2.
this unit must accept any interference, including
interference that may cause undesired
operation of the unit. Privacy of
communications may not be ensured when
using the unit.
74 Operating Instructions

Setting Up the Unit

This section explains the settings that you can configure
when you start the unit.
Accessing the start-up settings
1.
Connect the unit to an Ethernet cable capable of
delivering power (PoE compliant), or use an
optional AC adaptor to supply power.
2.
Connect the unit to the network.
3.
On the start-up screen, press
4.
Select the item for the settings you want to
configure.
Start-up menu
You can configure the following start-up settings:
1.
Information Display (Page 45)
View a variety of information about the unit.
2.
Network Settings (Page 45)
Assign an IP address in order to connect to the
network and use the unit.
3.
Network Test (Page 47)
Confirm the connection of network devices (e.g.,
the SIP server, routers, switching hubs).
4.
ECO Mode (Page 41)
Enable ECO mode.
5.
Language (Page 44)
If you prefer to use a language other than English,
change your language settings.
6.
Restart (Page 47)
Restart the unit for new settings to take effect.
7.
Firmware version (Page 47)
Check the firmware version of the unit.
.
Setup
Document Version 2012-02