Information Display; Network Settings - Panasonic KX-UT113 Operating Instructions Manual

Information Display

Setting
Information Display

Network Settings

IMPORTANT
We recommend configuring these settings with your administrator or dealer. Network settings can also be
configured through Web user interface programming (Page 58). Contact your administrator or dealer for
further information.
Setting
Network
When DHCP is selected
DNS
DNS1 (Manual DNS
*1
only)
Document Version 2012-02
Description
View a variety of information about
the unit. Press [ ] and [ ] to display
the various settings. The following
settings can be viewed:
•
Registration status to the SIP
server
•
IP address
•
Subnet mask address
•
Default gateway address
•
IP address of the DNS server 1
•
IP address of the DNS server 2
•
ACS status
•
Display lock status
•
Firmware version
•
Bluetooth headset status
(KX-UT248 only)
•
MAC address
Description
Configure the basic network settings.
If you select "DHCP", you must then
select whether the DNS setting is
configured automatically or
manually. If you select "STATIC",
you must manually specify the IP
address, subnet mask, default
gateway, and DNS servers.
Select whether the DNS server
information should be obtained
automatically (i.e., provided by the
DHCP server) or if you will specify it
manually.
If you select "Manual", see "DNS1"
and "DNS2" below.
Enter the IP address of the primary
DNS server.
Customizing the Telephone
Value Range
—
Value Range
DHCP, STATIC
Manual, Automatic
xxx.xxx.xxx.xxx
Operating Instructions
Default
—
Default
—
Automatic
—
45