Panasonic KX-UT113 Operating Instructions Manual page 11

Model Number: KX-UT123/KX-UT133/KX-UT136/
KX-UT248
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094 U.S.A.
Telephone No.: 1-800-211-PANA (7262)
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the
bottom of the cabinet of this equipment is a label that
contains, among other information, a product identifier
in the format
US:ACJ.......
If requested, this number must be provided to the
telephone company.
If trouble is experienced with this equipment, for repair
or warranty information, please contact:
Panasonic Service and Technology Company-BTS
Center
415 Horizon Drive Bldg. 300 Ste. 350-B
Suwanee, GA 30024-3186
Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public
service commission or corporation commission for
information.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation
of this equipment does not disable your alarm
equipment. If you have questions about what will
disable alarm equipment, consult your telephone
company or a qualified installer.
WHEN PROGRAMMING EMERGENCY NUMBERS
AND (OR) MAKING TEST CALLS TO EMERGENCY
NUMBERS:
a.
Remain on the line and briefly explain to the
dispatcher the reason for the call.
b.
Perform such activities in the off-peak hours, such
as early morning or late evenings.
This equipment is hearing aid compatible.
When you hold the phone to your ear, noise might be
heard in your Hearing Aid. Some Hearing Aids are not
adequately shielded from external RF (radio frequency)
energy. If noise occurs, use the speakerphone option
(if applicable) when using this phone. Consult with your
audiologist or Hearing Aid manufacturer about the
availability of Hearing Aids which provide adequate
Document Version 2012-02
shielding to RF energy commonly emitted by digital
devices.
For users in Canada only
•
This Class B digital apparatus complies with
Canadian ICES-003.
•
This product meets the applicable Industry Canada
technical specifications.
For KX-UT248 only
This unit features a built-in Bluetooth module that
can be used to wirelessly connect a Bluetooth
headset to the unit.
Radio Frequency Exposure Requirements
This product complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment. To
comply with FCC/IC RF exposure requirements, it must
be installed and operated in accordance with provided
instructions. The unit requires minimum 20 cm (8 in)
spacing must be provided between antennas and all
person's body (excluding extremities of hands, wrists
and feet) during wireless modes of operation. This
transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
Compliance with TIA-1083 standard
Telephone handsets identified with
Compatible with
Hearing Aid T-Coil
this logo have reduced noise and
interference when used with T-Coil
equipped hearing aids and cochlear
implants.
T
TIA-1083
Important Information
Operating Instructions 11