Troubleshooting - Procedures - Sundance Spas Cameo Owner's Manual

Message

16.0 Troubleshooting - Procedures

In the unlikely event your hot tub is not working the way you believe it
should, please first review all the installation and operating instructions in
this manual and check the message on the panel display; second, if you
are still not satisfied it is working properly, please follow the appropriate
troubleshooting instructions.
PROBLEM
None of the
components
operate ( i.e.
pump, blower,
light)
Meaning
"WATCHDOG" (hot tub is deactivated)
A problem has been detected which could cause
damage to the hot tub or its components. Contact your
Sundance Spas dealer or qualified service technician.
OPEN SENSOR (heater disabled) or SHORTED
SENSOR (hot tub is deactivated)
The high-limit temperature sensor is non-functional.
This must be repaired only by an Sundance Spas
dealer or qualified service technician.
OPEN or SHORTED SENSOR (heater disabled). The
main temperature sensor is non-functional. This must
be repaired only by an Sundance Spas dealer or
qualified service technician.
CLOSED or SHORTED FLOW SWITCH ON
SYSTEM STARTUP (system disabled) Flow switch
is non-functional. This must be repaired only by an
authorized dealer or qualified service technician.
PROCEDURE
Check the control panel lights.
1. If there are letters or symbols displayed on
the screen, refer to the previous section to
determine meaning and action required.
2. If nothing appears on the screen:
a. Check the household circuit breaker.
b. Contact you Sundance Spas dealer or qualified
service technician.
880 SERIES
Page 51