Entering An Address With A Postal Code - BENDIXKing AV80R User Manual

AV8OR User's Guide
2. By default, GoDrive proposes the country/state and settlement
where you are. If needed, tap the soft Key with the name of the
country/state, and select a different one from the list.
3. If needed, change the settlement:
•
To select the settlement from the list of recently used ones,
tap the
•
To enter a new settlement:
1. Tap the soft Key with the name of the settlement, or if
you
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
o
o
4. Pick the settlement from the list.
4. Tap the
5. The map appears with the selected point in the middle. Tap
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.

Entering an Address with a Postal Code

All of the above address searching possibilities can be performed
with entering the postal code instead of the settlement name. Find
below an example with a full address:
The procedure is explained starting from the Navigation menu.
1. Tap the following soft Keys:
Pub. No D200803000008
© Honeywell International Inc. Do not copy without express permission of
soft Key.
have changed
After entering a couple of characters, the names that
match the string appear in a list.
Tap
it appears automatically.
soft Key.
(Simple
Page 4-48
Honeywell.
Automotive Mode Operation
the
.
to open the list of results before
mode) or
Rev 2 Dec 2008.
country/state,
(Simple mode), or
tap