Ffc - Enterasys X-Pedition XSR-3150 Getting Started Manual

2895872(0x2c3000) bytes free on flash:
ds
This command sets the system date with the syntax
XSR-3020: ds 2003 6 1 3
dt
This command sets the system time using the syntax
XSR-3150: ds 11 59 59
ff
This command formats the Flash file system. We recommend that you first save any
.cert, .cfg
deleted. You are prompted to enter data by the following script:
XSR-3150: ff
You will lose all files in the "flash:" file system.
Are you sure you want to format the "flash:" file system? (y/n) y
Unlocking flash file sectors
Initializing DOS file system.
Formatting flashrom file system
...................................................... Done.
Set working directory to flash:
Using default Bootrom password. The system is not secure!!!
Use "bp" to change password

ffc

This command formats the CompactFlash card.
ng
This command retrieves a file over the network using a remote IP address/file path.
np
This command modifies network parameters. You are prompted to enter data by the following
script. While most of the options are self-explanatory, three require further description.
When set to no, the Autoboot option places the prompt in Bootrom mode when you boot or
power up the XSR.
, and your
startup-config
yyyy mm dd w (1=Sunday)
. E.g.:
hh mm ss
files to or a PC since any files in
cflash:
Bootrom Monitor Mode Commands
. For example:
.dat,
will be
flash:
XSR Getting Started Guide 3-39