Compactflash Card For The Adsl Nim; Formatting The Compactflash Card - Enterasys X-Pedition XSR-3150 Getting Started Manual

Installing a CompactFlash Memory Card
Gently insert the CF into the slot, taking care that the CF's wider grooved edge fits into the
wider track of the PCMCIA interface. If the card does not seat easily but stops halfway into the
slot, do not force it in - the card was inserted incorrectly. Flip it over and re-insert. Note that
the XSR's CF eject mechanism pops out for easy removal when you install the card.

CompactFlash Card for the ADSL NIM

The ADSL NIM is shipped with a CompactFlash card carrying the DSP firmware necessary for
connecting to a DSAM. Refer to

Formatting the CompactFlash Card

If your CF is not formatted, there are two ways you can format the card:
• Use the XSR Bootrom Monitor Mode
press the
you have not defined any password. The Bootrom Monitor Mode will appear. Enter
the router will complete the formatting.
• Install the CF in a PCMCIA card and enter the Windows format command. For further
instructions, refer to Windows documentation.
• After completing CF formating via Bootrom Monitor Mode, use the
XSR in normal mode.
2-6 Hardware Installation
Figure 2-8
Figure 2-13
keys and a password prompt will appear. Press ENTER (factory default) if
CTRL-C
Installing CompactFlash Card
for an illustration and installation instructions.
command. A few seconds after you boot up the XSR,
ffc
and
ffc
command to restart the
bc