Master Appliance Ultratorch UT-100Si Instruction Manual page 8

Optional Accessories UT‑100Si
Soldering Tips
1mm dia. tapered needle
soldering tip
3.3mm dia. chisel soldering tip
(standard)
2mm dia. spade soldering tip
3mm dia. spade soldering tip
0.5mm dia. tapered needle
soldering tip
Heat Tips
Outside Diameter
Inside Diameter
70-01-50
2.5mm O.D./1.59mm I.D.
70-01-52
5.7mm O.D./4.9mm I.D.
standard
Ultratane™ Butane
"ULTRA-REFINED" by Master...the only approved butane for Ultratorches.
• Single piece universal tip
• Purest refining method possible
• Special non-clogging formula to permit extended use
70-01-01
2mm dia. micro spade
soldering tip
70-01-02
0.5mm dia. square tapered
pyramid soldering tip
70-01-03
2mm dia. 35ϒ spade
soldering tip
70-01-04
3mm dia. 35ϒ spade
soldering tip
70-01-05
1mm dia. offset tapered
needle soldering tip
90-02
protective cap
70-01-51
4.25mm O.D./3.3mm I.D.
70-01-53
8.0mm O.D./7.4mm I.D.
70-01-06
8mm dia. high powered
chisel soldering tip
70-01-07
3mm dia.. high powered round
head needle soldering tip
70-01-08
5mm dia. high powered long
tapered chisel soldering tip
70-01-09
7mm dia. 45ϒ spade
soldering tip
70-01-10
hot knife tip
4mm dia. x 7mm pitch
adaptor
heat shrink tip
(standard)
heat shrink tip
70-52U
carrying strap
P/N 51773 - 5.125 oz.
P/N 10448 - 26gm. canisters
70-01-11
70-01-12
70-01-13
70-01-15
70-01-16
70-01-14
70-01-55
70-01-54