Related Manuals for Master Appliance ULTRATORCH UT-300SI
Summary of Contents for Master Appliance ULTRATORCH UT-300SI
- Page 1 Designers and Manufacturers of Heat Tools for Industry ® Ultratorch UT-300Si Heat Tool Instruction Manual UT-300 Si Made in Japan Please read, understand and keep this manual for future reference...
-
Page 2: Specification
Regulatory Information Declaration of Conformity Declares that the following product: Quality Department (According to EN 45014) Product Name: UT-300Si Master Appliance Corp. FAX (262) 633-9745 Manufacturer’s Name: Conforms to the following Master Appliance Corp. product specifications: IMPORTANT: Please read and understand all instructions before Manufacturer’s Address:... -
Page 3: Ignition Instructions
If difficulties are experienced, cool. Be certain “ON/OFF” lever based cleaner. please contact our Customer is “OFF”. 12. Use only Master Appliance Service Department who will 5. Wait for tips to cool before changing. Ultratane Butane Fuel to insure advise on adjustment. -
Page 4: Troubleshooting
To Replace Ejector HOW TO MOUNT HOW TO REMOVE 1. Loosen knurled 1. Mount new ejector and tighten with minus- head driver turning clockwise. nut and remove tip and tip housing. 2. Un-screw the screw with minus-head 2. Insert the lead wire into the ceramic pipe driver as illustrated. -
Page 5: Optional Accessories
Appliance. All warranty claims must Master Appliance Corp. fuel other than Master Appliance be made to Master Appliance and Attention: Repair Department Ultratane butane fuel. At the end of not the distributor. We decline...