CanyCom S160 Operator's Manual page 64

• Always remove battery from the machine before charging. Failure to do so may
cause damage to the electrical components and wiring.
• Follow the battery charger user's manual when charging.
Battery Cover
Battery Cover Latch
3683M-0508-010E
Upper Level
E L
E V
R L
P E
U P
Lower Level
3683M-0508-020E
Filler Plugs
3570M-0509-020E
Maintenance
Inspecting
1.
2.
3.
Battery
Battery Bracket
Filling
4.
E L
L E V
E R
U P P
5.
6.
7.
8.
Park the machine on level ground.
Unlatch battery cover latch and open battery
cover.
Visually inspect that battery fluid level is
between the "Upper Level" and "Lower
Level" lines. If the fluid level is below the
"Lower Level," fill.
Remove battery bracket and battery from
the machine.
Open filler plugs and add distilled water to
battery evenly until fluid level is between the
"Upper Level" and "Lower Level" lines.
Put filler plugs back in place.
Install battery.
Close battery cover and latch it.
-55-
5