CanyCom S160 Operator's Manual page 44

Item
Shall be free of cracks, defromation, or
excessive wear.
There shall not be excessive play in axle.
Wheels
Irregular noise or overheating shall not be
Sprockets
observed when traveling.
Idlers
Mounting bolt or nut shall not be loose or
missing.
There shall be no oil leak in or around axle.
There shall not be marked cut, deterioration,
or wear.
Track shall be properly tensioned; shall not
be too loose or too tight.
Tracks
Track core shall not be missing or damaged.
Tension bolt shall be free of deformation or
corrosion.
Parking brake shall work properly.
Parking brake shall be able to hold the
Parking Brake
machine on a 20-degree slope.
Rods, links, and wires in linkage shall be free
of deformation or damage.
Linkage
Connections shall be free of looseness,
excessive play, or missing cotter pins.
There shall be no leak in or around hydraulic
pump.
Fastening bolts and nuts shall not be loose
or missing.
No irregular vibration, noise, or heat shall
be observed when hydraulic pump is in
Hydraulic
operation.
Pump
Amount and pressure of discharge under
load shall be within the standard range
specified by the manufacturer.
*this may be skipped if irregular vibration,
noise, or heat described above is not
observed.
There shall be no leak in or around hydraulic
Hydraulic
valve.
Valve
Maintenance
Description
-35-
Schedule
Note
√ √ √
√ √ √
√ √ √
√ √
√ √ √
Adjusting: Page 46
√ √ √
√ √ √
√ √ √
√ √ √ Adjusting: Page 52
√ √
√ √
√ √
√ √
√ √
√ √
√
√ √
5