CanyCom S160 Operator's Manual page 29

4
• Do not use this machine in the altitude above 1500m in its original configuration.
This machine cannot perform adequately above that altitude. Using this
machine under such conditions may result in an accident or cause damage to
the machine. If you need to use this machine above that altitude, contact your
CANYCOM representative.
Steering Levers
3683M-0402-010E
3683M-0402-020E
Parking Brake Lock Lever
3683M-0402-030E
Operation
Neutral Position
Dump Lever
Turn Lever
Lock Plate
Parking Brake Pedal
Normal Starting
1. Make sure steering levers are in the neutral
position.
2. Make sure dump and turn (swivel) levers are
in the neutral position and lock plate is in
the locked position (around the base of the
levers).
3. Depress parking brake pedal fully with
parking brake lock lever pushed down to
engage parking brake.
NOTE
• The engine cannot be started unless the
steering levers are neutral and the parking
brake is engaged. This is due to a safety
feature on this product.
-20-