CanyCom S160 Operator's Manual page 59

5
3683M-0507-070E
Maintenance
Drain Plug
5. Wipe excess oil around inspection hole.
Clean inspection plug and filler cap. Put
inspection plug and filler cap back in place
and tighten them securely.
Draining
1. Have an appropriate oil drain pan ready.
2. Remove drain plug to drain oil.
3. Clean drain plug and seal washer. Put drain
plug back in place and tighten it securely.
Watch for leaks.
NOTE
• Removing filler cap helps drain oil.
Filling
1. Remove filler cap and inspection plug.
2. Fill oil slowly until oil flow out of inspection
hole.
3. Wipe around inspection hole.
4. Clean inspection plug and seal washer. Put
inspection plug back in place and tighten it
securely. Watch for leaks.
5. Put filler cap back in place.
6. Install floor panel.
NOTE
• Oil Capacity: 3.3L
• Oil to Use: Gear Oil, API rating GL-4 or 5,
SAE index #80.
-50-